Nortel Networks NN43001-563 - Manual (Page 36)

36 System description
Component Product codes
Backplane to I/O Panel ribbon cable assembly compatible with
NTCW84JA I/O Panel Filter Connector Block with ITG-specific
filtering for 100BaseTX TLAN subnet connection (replaces
NT8D81BA Backplane to I/O Panel ribbon cable assembly
equipped with non-removable Molded Filter Connectors) NT8D81AA
Documentation
IP Trunk 3.01 (and later) NTP CD-ROM – Multilingual NTVQ61BA
PC Cards
C7LIU DCH PC Card with Layer 2 DCH Software NTWE07AA
Ordering rules and guidelines
IP Trunk 3.01 (and later) can be ordered as a VoIP trunk gateway with 32
ports, or as a software upgrade on an existing VoIP trunk gateway on the
Media Card 32-port trunk card or ITG-Pentium 24-port trunk card. One IP
Trunk card in the system must be equipped with a D-Channel PC Card kit.
One kit supports 12 Media Card 32-port trunk or 16 ITG-Pentium 24-port
trunk card with a maximum of 382 total ports.
Ordering rules for an IP Trunk 3.01 (and later) node
Initial configuration of an IP Trunk 3.01 (and later) node requires one
NTVQ01BB IP Trunk 3.01 Small and Large Systems 32-port package
with DCHIP as appropriate for the system. These packages include all
components needed for a single-card node, except for the cables that
provide interface to the MSDL and SDI/DCH cards. The following DCH
interface cables are included:
• NTND26AA (Large Systems)
• NTAK19FB and NTWE04AD (Small Systems)
The following packages are required for IP Trunk 3.01 (and later):
• ISDN Base (ISDN) package 145
• ISDN Signaling Link (ISL) package 147
TM 3.1 is required and must be ordered separately.
For MSDL and DCHIP cards that reside in the same Large System UEM
equipment row, order:
• NTND26 MSDL DCH cable in sufficient length to reach from the MSDL
to the I/O Panel of the IPE module that contains the DCHIP
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.