Nortel Networks NN43001-563 - Manual (Page 400)

400 Maintenance
Command Description
numNodesInFallbackShow List the IP addresses of the IP Trunk 3.01 (and later) nodes
that are in fallback to the conventional voice circuit-switched
network.
swVersionShow Print out software version.
resetOm Reset the Operational Measurement file timer.
logFileOn Turn on logging.
logFileOff Turn off logging.
logFileShow Show if logging is on or off.
logStatus Show if logging is on or off.
useM1ForRingBack This command is used to turn off the local ring back generated
on the IP Trunk card. By default, the IP trunk card will generate
local ring back for out of band ring back. This command will
only be in effect until the card reset.
displayClear Clear the maintenance display on the faceplate of the IP trunk
card.
shellPasswordSet Change the default ITG shell password.
emodelSim Allow user to interactively determine QoS score.
itgHelp Show the complete command list. "?" also shows the list.
itgCallTrace Shows call trace log.
tLanSpeedSet Set the speed of the TLAN network interface.
tLANDuplexSet Set the duplex mode of the TLAN network interface.
logout Exit the shell.
PING Test remote host is reachable:
PING<host><numPackets><option>
This command sends an ICMP ECHO_REQUEST packets to a
network host. The host matching the destination address in the
packets responds to the request. If a response is not returned,
the sender times out. This command is useful to determine if
other hosts or IP trunk cards are properly communicating with
the sender card. The <numPackets> parameter specifies how
many packets to send; if it is not included, ping runs until it is
stopped by Ctrl-C (which also exits the ITG shell).
Example: ITG> PING "47.82.33.123", 10
trap_gen SNMP test alarm (one of each type) generation.
clearLED Clear the LED display.
esn5PrefixSet Set the esn5Prefix, default is "100":esn5Prefix<"char string">
esn5PrefixShow Display the esn5Prefix character string.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.