Figure 95 new itg node - configuration tab, Figure 95 "new itg node - configuration tab – Nortel Networks NN43001-563 User Manual

Page 304

Advertising
background image

304

Provisioning IP Trunk 3.01 (and later) in TM 3.1

Figure 95
New ITG Node - Configuration tab

A minimum of one IP trunk card, Leader 0, must be defined. This
card acts as the leader card on startup and remains as leader until
it suffers some sort of failure that would require changeover to the
Backup Leader card.

TM 3.1 requires that the second card that is provisioned be
configured as Leader 1 (Backup Leader). Leader 1 must be
configured before any Follower cards are provisioned.

10

Enter the appropriate data in the following fields:

Card role – the default is Leader 0, indicating that this is the
primary leader. Other options include Leader 1 (Backup) and
Follower.

Management IP – the IP trunk card ELAN network interface IP
address

The MAC address entered must match the IP trunk card’s MAC
address, or the card cannot be used. The MAC address is unique
to every card and if the address is entered is incorrect, the TM 3.1
server cannot send any information to the IP trunk card.

Management MAC – the IP trunk card ELAN MAC address

Voice IP – the IP trunk card’s TLAN network interface IP address
for RTP and H.323 messaging

Voice LAN gateway IP – the lowest IP address on the TLAN
subnet

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563

01.01

Standard

Release 5.0

30 May 2007

Copyright © 2007, Nortel Networks

.

Advertising