Nortel Networks NN43001-563 - Manual (Page 369)

Access the ITG shell through a maintenance port or Telnet 369
Figure 147
Select card and open Telnet session
4 Perform the following action to increase the Telnet terminal buffer
size to capture multiple screens of data from the IP trunk card:
From the Telnet "Terminal" menu, select "Preferences". Set the
Buffer Size to a larger value, such as 1000, and click "OK". The
Telnet buffer size has to be only once, because Telnet preferences
are automatically saved.
5 To prevent the loss of diagnostic data from the IP trunk card if the
Telnet session terminates unexpectedly, enable logging of Telnet
sessions on the TM 3.1 PC:
From the Telnet "Terminal" menu, select "Start Logging". Use the
"Browse" dialog to choose the appropriate folder and file name for
Telnet log file for the current Telnet session. Open the Telnet log file
using a text editor, such as Windows Notepad, or a word processor
for large log files.
—End—
Change the default ITG shell password to maintain access security
Schedule routine changes of user names and passwords to maintain access
security. The ITG user name and password protects the maintenance port,
FTP, and Telnet access to the IP trunk card over the LAN.
Follow the steps in Procedure 62 "Changing the default ITG shell password"
(page 370) to change the default ITG shell password.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.