Nortel Networks NN43001-563 - Manual (Page 289)

Add a site and system 289
Add a system
Though the site has been added, no switches or nodes have been defined.
A PBX, also called a system, must be added. For IP Trunk 3.01 (and later),
the system usually corresponds to a single PBX.
Procedure 42
Adding a system
Step Action
1 There are two ways to add a new system in the TM 3.1 Navigator
window, as follows:
• Right-click the new site. A menu appears, as shown in Figure 76
"New system – add a system by right-clicking" (page 289) . Click
Add System. The Add System window opens. See Figure 78
"Select a system type" (page 291) .
Figure 76
New system, add a system by right-clicking
• Alternatively, select the new site. From the menu bar, click
Configuration > Add System. See
Figure 77 "New system –
menu bar" (page 290) . The Add System window opens. See
Figure 78 "Select a system type" (page 291) .
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.