Nortel Networks NN43001-563 - Manual (Page 371)

Access the ITG shell through a maintenance port or Telnet 371
Example of the Media Card 32-port trunk card prompt screen:
Example of the ITG-Pentium 24-port trunk card prompt screen:
If the prompt " vxWorks login: " appears, the BIOS ROM prompt
has been lost and the card must be reset again.
At the BIOS ROM shell prompt enter the following command:
-> nvramClear
This command clears the user configured password, the leader flag,
and the IP configuration information from the NVRAM.
WARNING
If the Media Card 32-port trunk card or the ITG-Pentium
24-port trunk card asks for
xxx to get into the BIOS, the
firmware on that IP trunk card must be upgraded. Contact
Nortel Technical Support for more information.
4 Press the reset button on the card again.
The IP trunk card starts up and displays "T:20" on the 4-character
display. The IP trunk card begins sending BOOTP requests on the
ELAN subnet. A series of dots appears on the TTY.
5 Type +++ to bring up the ITG shell command line prompt:
............... +++
When prompted to login, enter the default username and password
as:
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.