Nortel Networks NN43001-563 - Manual (Page 382)

382 OA and M using the ITG shell CLI and overlays
• Alternatively, use the SNMP client on the TM 3.1 PC to connect to the
FTP host on the IP trunk card. Log in using the ITG shell user name
and password. Get the Card Properties file from the path, which is
/C:/Config/CONFIG1.INI. Use a text editor to open the Card Properties
file and read the community name.
IP Trunk 3.01 (and later) configuration commands
Table 53 "IP Trunk 3.01 (and later) configuration commands" (page 382)
lists the IP Trunk 3.01 (and later) configuration commands.
Table 53
IP Trunk 3.01 (and later) configuration commands
Command Description
setLeader The one command that performs all the necessary actions to make
a Leader. Sets the IP address, gateway, subnet mask, boot method
to static, and leader bit in NVRAM.
clearLeader Enter this command to clear the Leader information in NVRAM and
set the boot method to use BOOTP, making the card a Follower.
NVRIPShow Enter this command to print the values of the IP parameters that
exist in NVRAM.
Download the IP Trunk 3.01 (and later) error log
The IP Trunk 3.01 (and later) error log contains error conditions and normal
events. Some of the error conditions can be severe enough to raise an
alarm through SNMP traps.
The following commands can download an IP Trunk 3.01 (and later) error
log:
• currLogFilePut
• prevLogFilePut
System commands LD 32
Perform the following system administration commands using LD 32:
• "Disable the indicated IP trunk card" (page 361) .
Disable the IP trunk card before card properties are transmitted from the
TM 3.1 IP Trunk 3.01 (and later) application to the IP trunk card.
The card reset button is only available in the TM 3.1 IP Trunk 3.01 (and
later) application when the IP trunk card is disabled.
Disabling the IP trunk card in LD 32 does not disable the Active Leader
or Backup Leader functions.
• "Disable the indicated IP trunk card when idle" (page 362) .
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.