Disable the indicated ip trunk card when idle, Enable an indicated ip trunk card, Disable an indicated ip trunk card port – Nortel Networks NN43001-563 User Manual

Page 362: Enable an indicated ip trunk card port, Display ip trunk card id information, Display ip trunk card status

Advertising
background image

362

TM 3.1 OA and M using TM 3.1 applications

Disable the indicated IP trunk card when idle

To disable the indicated IP trunk card when idle in LD 32, use the following
command:

DISI l s c

Disable the indicated IP trunk card
when idle, where: l = loop,
s = shelf, c = card

Enable an indicated IP trunk card

To enable an indicated IP trunk card in LD 32, use the following command:

ENLC l s c

Enable the indicated IP trunk card,
where: l = loop, s = shelf,
c = card

Disable an indicated IP trunk card port

To disable an indicated IP trunk card port in LD 32, use the following
command:

DISU l s c u

Disable the indicated ITG unit
(port), where: l = loop, s = shelf,
c = card, u = unit

Enable an indicated IP trunk card port

To enable a indicated IP trunk card port in LD 32, use the following
command:

ENLU l s c u

Enable the indicated ITG unit
(port), where: l = loop, s = shelf,
c = card

Display IP trunk card ID information

To display the IP trunk card ID in LD 32, use the following command:

IDC l s c

Display the card ID for the IP trunk
card, where: l = loop,
s = shelf, c = card

Display IP trunk card status

To display the status of a indicated IP trunk card in LD 32, use the following
command:

STAT l s c

Display the status of the indicated
IP trunk card, where: l = loop,
s = shelf, c = card

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563

01.01

Standard

Release 5.0

30 May 2007

Copyright © 2007, Nortel Networks

.

Advertising