Nortel Networks NN43001-563 - Manual (Page 269)

Change the default ITG shell password to maintain access security 269
4 Set the correct date and time.
5 Click OK.
The clock is updated immediately on the Active Leader card (Leader
0 or Leader 1), which in turn updates the other cards in the IP Trunk
3.01 (and later) node.
—End—
Change the default ITG shell password to maintain access security
Follow the steps in Procedure 33 "Changing the default ITG shell password"
(page 269) to change the default user name and password when installing
the IP Trunk 3.01 (and later) node to maintain access security. The ITG
user name and password protects maintenance port access, Telnet, and
FTP access to the Media Card 32-port and ITG-Pentium 24-port trunk
cards over the LAN.
Procedure 33
Changing the default ITG shell password
Step Action
1 Select the new IP Trunk 3.01 (and later) node in the upper part of
the IP Telephony Gateway - ISDN IP Trunk window.
2 For each card in the node, right-click the card and select Telnet to
ITG card from the right-click menu.
The Telnet window appears with the VxWorks prompt.
3 When prompted to login, enter the default username and password
as:
VxWorks login: itgadmin
Password: itgadmin
ITG>
4 Use the command shellPasswordSet to change the default user
name and password for Telnet to ITG shell and FTP to the IP trunk
card file system. The default user name is
itgadmin and the
default password is itgadmin .
Enter the following information when prompted:
Enter current username: itgadmin
Enter current password: itgadmin
Enter new username: new username
Enter new password: new password
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.