Nortel Networks NN43001-563 - Manual (Page 278)

278 Install and configure IP Trunk 3.01 (and later) node
Figure 66
Devices.txt file:
6 For each IP trunk card in each monitored IP Trunk 3.01 (and later)
node, add a line consisting of three fields separated by spaces. See
Table 50 "Format of Devices.txt file" (page 278) . Enter the first line
beginning underneath the last line that begins with a "#". Lines
beginning with "#" are comments and not processed. Do not begin
any of the lines defining IP Trunk 3.01 (and later) devices with "#".
Table 50
Format of Devices.txt file
Device Type IP Address Device Name
ITG
ITG
ITG
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
Site_Leader_0
Site_Leader_1
Site_Follower_2
The Device Name cannot contain any spaces. Use a descriptive name
for the system site where the IP Trunk 3.01 (and later) node is located.
7 Click File > Save.
8 In the Alarm Notification Run Options window, click OK.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.