Nortel Networks NN43001-563 User Manual
Page 413
IP Trunk 3.01 (and later) upgrades
413
3
Check the current software version of the IP trunk cards to be
upgraded. To check the software version, double-click a card and
click the Configuration tab. "S/W version" displays the current
software version as read from the IP trunk card.
4
From the main card list view, select the cards to be upgraded.
Upgrade all cards in the node together, unless installing a spare card
that has older software.
5
To disable all IP trunk cards to be upgraded, use one of the following:
•
the LD 32 DISI command from the TM 3.1 Maintenance windows
•
the TM 3.1 System Passthru terminal
•
a system management terminal directly connected to a TTY port
on the system
6
In the TM 3.1 IP Telephony Gateway Main window, select
"View/Refresh" and verify that the card status is showing "Disabled."
7
Select menu Configuration > Synchronize > Transmit.
An ITG – Transmit Options dialog box is displayed.
8
In the Transmit Options group box, select the radio button "Transmit
to selected cards."
9
In the Software Download group box, check "Card software."
10
Click the Browse button to locate the IP Trunk 3.01 (and later) IP
trunk card software downloaded earlier to the TM 3.1 PC hard drive.
Select the software file and click "Open" to save the selection. The
path and file name of the IP Trunk 3.01 IP trunk card software
appears in the edit box next to the Browse button.
11
Click the Start Transmit button to begin the IP trunk card software
upgrade process.
The software is transmitted to each card in turn and is burned into
the flash ROM on the IP trunk card.
Monitor the status in the Transmit Control window. Confirm that
the IP trunk card software is transmitted correctly to all cards. Note
any error messages. Examine and correct any problems. Repeat
IP trunk card software transmission until it is completed correctly
on each IP trunk card. The IP trunk cards continue to run the old
software until they are rebooted.
12
Reboot each IP trunk card that received transmitted software, so that
the new software can take effect. Start the rebooting with Leader 0,
then Leader 1, and lastly the Follower cards. After all the IP trunk
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563
01.01
Standard
Release 5.0
30 May 2007
Copyright © 2007, Nortel Networks
.