Nortel Networks NN43001-563 - Manual (Page 342)

342 TM 3.1 OA and M using TM 3.1 applications
"System commands – LD 32" (page 360)
"Disable the indicated IP trunk card" (page 361)
"Disable the indicated IP trunk card when idle" (page 362)
"Enable an indicated IP trunk card" (page 362)
"Disable an indicated IP trunk card port" (page 362)
"Enable an indicated IP trunk card port" (page 362)
"Display IP trunk card ID information" (page 362)
"Display IP trunk card status" (page 362)
"Display IP trunk card port status" (page 363)
Introduction
This chapter explains how to perform IP Trunk 3.01 (and later) Operation,
Administration and Maintenance (OA&M) tasks using TM 3.1 Navigator,
Maintenance windows and System Terminal Passthru, the TM 3.1 Alarm
Notification application, and the TM 3.1 ITG ISDN IP Trunks application.
Most OA&M tasks are performed from TM 3.1. A few OA&M tasks must be
performed through the ITG shell (
"OA&M using the ITG shell CLI and
overlays" (page 365) ) If TM 3.1 is temporarily unavailable, many OA&M
tasks can be performed from the ITG shell as an alternative method.
TM 3.1 OA and M procedure summary
• "Delete a node" (page 343)
• "Database locking" (page 344)
• "ITG Card Properties window" (page 345)
• "Transmit configuration data" (page 348)
• "Add an IP Trunk 3.01 (and later) node on OTM by retrieving an existing
node" (page 351)
• "Retrieve and add an IP Trunk 3.01 (and later) node for maintenance
and diagnostic purposes" (page 353)
• "Retrieve IP Trunk 3.01 (and later) configuration information from the IP
Trunk 3.0 (and later) node" (page 355)
• "Schedule and generate and view IP Trunk 3.01 (and later) OM reports"
(page 356)
• "Backup and restore operations" (page 359)
• "Alarm Notification" (page 359)
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.