Nortel Networks NN43001-563 User Manual
Page 305
Add an IP Trunk 3.01 (and later) node
305
•
Card TN – the first three numbers (loop/shelf/card). The
exception is the Meridian 1 Option 11C Cabinet and CS 1000M
Cabinet which is only "card".
•
Card density – 24- or 32-port IP trunk card
•
D-channel – the D-channel on the system. If the D-channel card
resides on this IP trunk card, check the DCHIP box.
•
Protocol – the local protocol. For IP Trunk 3.01 (and later) to
interwork with CS 1000M, the protocol must be SL1 or SL1 with
ESN, as H.323-compatible gateways do not understand QSIG.
The QSIG checkbox enables IP Trunk 3.01 to be configured with a
QSIG channel address length of 7 bits for Primary Rate D-Channels
or 8 bits for an ISL D-Channel used in prior releases of IP Trunk
software. The QSIG checkbox is checked or unchecked by default,
depending on the software release running on the system. The
checkbox is enabled only when the selected protocol is QSIG (ESGF
or ISGF) and the node version is IP Trunk 3.01.
•
First CHID 0 – the first channel number. All other channels
autonumber in increasing order.
11
Click Add to define the card.
Clicking Add does not add the D-channel or card to the system;
it only adds the IP trunk card information. The system must still
be provisioned separately.
When Add is clicked, the lower card information window displays
the saved card information. See
Configuration tab window with Leader 0 provisioned" (page 306)
.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563
01.01
Standard
Release 5.0
30 May 2007
Copyright © 2007, Nortel Networks
.