Multi-purpose serial data link (msdl) commands, Simple network management protocol (snmp), Table 58 msdl commands – Nortel Networks NN43001-563 User Manual

Page 397: Table 59 error events

Advertising
background image

System level maintenance

397

Multi-purpose Serial Data Link (MSDL) commands

All system MSDL commands are supported. Use LD 96 to enter MSDL
commands.

Table 58 "MSDL commands" (page 397)

lists some of the more

important commands.

Table 58
MSDL commands

Command

Description

ENL DCH num

Enables the D-channel.

DIS DCH num

Disables the D-channel.

STAT DCH num

Displays the state of the D-channel application.

RLS DCH num

Releases the D-channel.

EST DCH num

Establishes multiple frame operation on the
D-channel.

Simple Network Management Protocol (SNMP)

An SNMP stack sends appropriate traps to TM 3.1 or an SNMP manager.
A buffer containing received traps is also available through the CLI if no
SNMP/Alarm Manager exists.

Error traps

Table 59 "Error events" (page 397)

shows the error events that cause the

SNMP agent to issue a trap.

Table 59
Error events

Event

Description

Loss of Voice Port connectivity

Failure in the Ethernet voice port.

QoS Minor Threshold Exceeded

The QoS minor alarm threshold has been exceeded.

dspResetAttempted

One of the DSP devices has failed and an attempt
has been made to reset it.

dspResetFailed

An attempt to reset a DSP has failed. The channels
associated with that DSP are unusable.

Leader Not Responding

The Leader card is not responding.

DCHIP Not Responding

A DCHIP card is not responding.

C7 PC Card Failed

The PC Card Device Driver detected that the C7 PC
Card has failed. The D-channel link is released.

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563

01.01

Standard

Release 5.0

30 May 2007

Copyright © 2007, Nortel Networks

.

Advertising