Nortel Networks NN43001-563 - Manual (Page 282)

282 Provisioning IP Trunk 3.01 (and later) in TM 3.1
For detailed information on configuring a system in TM 3.1, see Telephony
Manager 3.1 System Administration (NN43050-601).
Add a site and system
Before the IP Trunk 3.01 (and later) application can be used, a site, a
system, and at least one node must be configured.
ATTENTION
IMPORTANT!
When TM 3.1 is launched, it launches its own FTP service. Other FTP services,
such as those found in Windows NT4 and Windows 2000 (which are launched by
default) must be turned off, or TM 3.1 will not work properly.
Add a site
The first step is to add a site (or end-point).
Procedure 39
Adding a site
Step Action
1 Log in to the TM 3.1 Navigator.
The window displays two sections – Services and Sites. See Figure
67 "OTM Navigator" (page 282) .
Figure 67
TM 3.1 Navigator
2 Click Sites to highlight it.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.