Nortel Networks NN43001-563 - Manual (Page 328)

328 Provisioning IP Trunk 3.01 (and later) in TM 3.1
In the example seen in Figure 122 "Remote Node Properties – Digits
dialed tab with a selected destination node" (page 327) , the dialing
plan digits to be added are 613-961-xxxx.
7 Click the ADD button to add this dialing prefix to the list of
previously-configured dialing plans displayed in the lower window.
8 To change the information for a destination node, select the desired
destination node in the lower window, make the needed changes in
the correct field above the lower window, and click Change. See
Figure 123 "Changing the destination node information" (page 328) .
To delete a destination node from the lower window, select the
desired node and click Delete. Although there is no warning box to
request confirmation of the deletion, the destination can immediately
be re-added if deleted in error.
Figure 123
Changing the destination node information
Destination not in local TM 3.1 provisioning
9 Select Not Defined on this PC from the Node drop-down list on the
ITG Dialing Plan – Remote Node Properties – General tab. See
Figure 124 "Destination not in local OTM provisioning" (page 329) .
Select H.323 V2 from the Node capability drop-down list if selecting
an IP Peer H.323 Gateway. See
Figure 125 "Selecting an IP Peer
H.323 Gateway" (page 329) .
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.