Nortel Networks NN43001-563 - Manual (Page 182)

182 Install and configure IP Trunk 3.01 (and later) node
Step Procedure See
page
"Configure SNMP Traps/Routing and IP addresses tab" (page 246) .
"Configure Accounting server" (page 249) .
"Control node access with SNMP community name strings" (page 250) .
"Exit node property configuration session" (page 251) .
"Create the IP Trunk 3.01 (and later) node dialing plan using OTM" (page 251) .
"Retrieve the IP Trunk 3.01 (and later) node dialing plan using OTM" (page
257)
.
5 "Transmit IP trunk card configuration data from OTM 2.1 (and later) to the
IP trunk cards" (page 259)
.
"Configure the Leader 0 IP address" (page 259) .
"Transmit the node properties, card properties and dialing plan to Leader 0"
(page 263)
.
"Verify installation and configuration" (page 265) .
"Transmit card properties and dialing plan to Leader 1 and Follower cards"
(page 267)
.
6 "Configure date and time for the IP Trunk 3.01 (and later) node" (page 268) .
7 "Change the default ITG shell password to maintain access security" (page
269)
.
8 "Check and download IP trunk card software in OTM 2.1 (and later)" (page
271)
.
"Transmit new software to the IP trunk cards" (page 273) .
"Upgrade the DCHIP PC Card" (page 275) .
9 "Configure OTM Alarm Management to receive SNMP traps from the IP trunk
cards" (page 276)
.
10 "Make test calls to the remote nodes (ITG Trunk or IP Trunk)" (page 279) .
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.