Quality of service, Figure 21 dtmf tone detection – Nortel Networks NN43001-563 User Manual

Page 70

Advertising
background image

70

System description

Detection" must be selected (checked) in TM 3.1. See

Figure 21 "DTMF

tone detection" (page 70)

. For more information on how to configure the

IP Trunk 3.01 (and later) DSP, see

"Configure DSP profiles for the IP Trunk

3.01 (and later) node" (page 242)

. If the IP Trunk 3.01 (and later) node is

using G.711 without "DTMF Tone Detection" checked, there is no guarantee
that DTMF tones will be properly transmitted to the far end, due to the
possibility of latency or packet loss.

Figure 21
DTMF tone detection

Quality of Service

Quality of Service (QoS) is the gauge of quality of the IP network between
two nodes. As QoS degrades, existing calls suffer from poor voice and
fax quality. New calls will not be initiated if transmissions degrade below
an acceptable level.

Behavioral characteristics of the IP network depend on the following:

Round Trip Time (RTT)

latency

queuing delay in the intermediate nodes

packet loss

available bandwidth

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563

01.01

Standard

Release 5.0

30 May 2007

Copyright © 2007, Nortel Networks

.

Advertising