General.information, Technical.data, General information – Burkert Type 8693 User Manual
Page 174: Technical data
174
PROFIBUS-DP
26.
general infOrmaTiOn
The following sections of the general operating instructions do not apply to the positioner with PROFIBUS-DP:
• Variants of the positioner
• Initial start-up
• Electrical connection
• Specifying the standard settings
Function
INPUT
Function
SPLTRNG
Function
BINARY-IN
Function
OUTPUT
Function
CAL.USER / calibr. INP
Function
CAL.USER / calibr. SP
27.
Technical daTa
The protocol sequence complies with the standard DIN 19245 Part 3.
Gsd file
BUE2C630.GSD
Bitmap files
BUE2C630.BMP
pno-id
C630 Hex
Baudrate
max. 12 Mbaud
(is set automatically by the positioner)
sync and freeze modes
are not supported
diagnosis telegram
No device-specific diagnosis
parameter telegram
No user parameters
The process data is configured in the positioner and in the PROFIBUS master.
Maximum 10 process values (total
INPUT and OUTPUT) can be transferred.
english
Type 8692, 8693