Burkert Type 8693 - Manual (Page 26)

26
Description of system
8.2. functions of the process controller software
Additional.function Action
Position.controller.with.additional.function
Sealing function
CUTOFF Valve closes tight outside the control range. Specification
of the value (in %), from which the actuator is completely
deaerated (when 0%) or aerated (when 100%).
Stroke limit
X.LIMIT Mechanical valve piston movement only within a defined
stroke range
Correction line to adjust the operating
characteristic
CHARACT The operating characteristic can be linearized
Insensitivity range
X.CONTROL The position controller is initially actuated from a control
difference to be defined
Effective direction of the controller nominal value
DIR.CMD Reversal of the effective direction of the nominal value
Safety position
SAFEPOS Definition of the safety position
Limit of the control speed
X.TIME Input of the opening and closing time for the entire stroke
Effective direction of the actuator
DIR.ACT Adjustment of the effective direction between aeration
state of the actuator and the actual position
Signal level error detection
SIG.ERROR Check the input signals for sensor break.
Warning output on the display and start up of the safety
position (if selected)
Binary input
BINARY. IN Switch over AUTOMATIC-MANUAL or
Start up of the safety position
Analogue feedback (option)
OUTPUT Status signal set-point or actual value
2 binary outputs (option)
OUTPUT Output of two selectable binary values.
User calibration
CAL.USER Change to the factory calibration of the signal input
Table 4: Functions position controller
english
Type 8692, 8693