Burkert Type 8693 - Manual (Page 218)

218
Maintenance and troubleshooting
50. errOr messages and malfuncTiOns
Type 8693
50.1. error messages on the display
50.1.1. general error messages
Display Causes.of.error remedial.action
min
Minimum input value has been reached Do not reduce value further
max
Maximum input value has been reached Do not increase value further
CMD error Signal error
Set-point value position controller
Check signal
SP error Signal error
Set-point value process controller
Check signal
PV error Signal error
Actual value process controller
Check signal
PT 100 error Signal error
Actual value Pt 100
Check signal
EEPROM fault EEPROM defective not possible, device defective
MFI fault 81) Field bus board defective
invalid code Incorrect access code Input correct access code
Table 61: General error messages, Type 8693
81)
only field bus
english
Type 8692, 8693