Burkert Type 8693 - Manual (Page 93)

93
Start-up and operation of the
position controller Type 8692
22.2. configuration menu
The Configuration menu consists of the main menu and auxiliary menu.
• The main menu includes firstly the basic functions which you specify during the initial start-up.
• The auxiliary menu includes additional functions and is accessible via the ADD.FUNCTION menu option of the
main menu.
Device functions and parameters can be specified within the main menu. If required, extend the main menu with
auxiliary menu functions which you can then specify.
22.2.1. switching between process operating level and
configuration level
Process operating level
MANUAL AUTOMATIC Basic
functions Auxiliary
functions
Configuration level
left selection key
>3s MENU
left selection key
EXIT
Figure 42: Operating levels
→
To activate the Configuration menu, press the left selection key (MENU) at the Process operating level for
approx. 3 seconds (wait for countdown).
22.2.2. including auxiliary functions in the main menu
→
Press the arrow keys to select the ADD.FUNCTION menu option in the main menu and press the right
selection key
(ENTER) to enter the submenu.
→
Press the arrow keys to select the required auxiliary function.
→
Press the selection key on the right (ENTER) to mark the auxiliary function with a cross (x).
→
All marked functions are transferred to the main menu when the selection key on the left (EXIT) is pressed.
→
In the main menu input the parameters of the auxiliary functions.
english
Type 8692, 8693