Burkert Type 8693 - Manual (Page 216)

216
Maintenance and troubleshooting
49. errOr messages and malfuncTiOns
Type 8692
49.1. error messages on the display
49.1.1. general error messages
Display Causes.of.error remedial.action
min
Minimum input value has been reached Do not reduce value further
max
Maximum input value has been reached Do not increase value further
CMD error Signal error
Set-point value position controller
Check signal
EEPROM fault EEPROM defective not possible, device defective
MFI fault 80) Field bus board defective
invalid code Incorrect access code Input correct access code
Table 58: General error messages, Type 8692
80)
only field bus
english
Type 8692, 8693