On.process.valves.of.series.2103,.2300.and.2301 – Burkert Type 8693 User Manual
Page 48
![background image](/manuals/330046/48/background.png)
48
Installation
15.2. installation of the positioner Type 8692 and 8693
on process valves of series 2103, 2300 and 2301
danGer!
Danger.–.high.pressure.in.the.equipment!
There is a serious risk of injury when reaching into the equipment.
• Before loosening the lines and valves, turn off the pressure and vent the lines.
procedure:
1..Install.switch.spindle
Transparent cap
Actuator
Pilot air ports
(plug-in hose connectors with collets or
threaded bushings)
Figure 14:
Installation of the switch spindle (1), series 2103, 2300 and 2301
→
Unscrew the transparent cap on the actuator and unscrew the position display (yellow cap) on the spindle
extension (if present).
→
For version with plug-in hose connector, remove the collets (white nozzles) from both pilot air ports (if
present).
english
Type 8692, 8693