Burkert Type 8693 - Manual (Page 43)

43
Control and display elements,
operating modes
14. OperaTing levels
The menu structure in the control module of the positioner contains 2 operating levels:
• level 1: operate process
Operating mode AUTOMATIC → Process / input data displayed
MANUAL → Actuator opened and closed manually
• level 2: parameterization and configuration
Input operating parameters
Supplement the menu with optional menu options
14.1. switching between the operating levels
If AUTOMATIC operating mode has been set when switching from level 1 (Operate process) to level 2
(Parameterization and Configuration), the process continues running while positioner settings are imple-
mented on level 2.
→
To switch from level 1 (Operate process) to level 2 (Parameterization), press the selection key on the left
(MENU) for approx. 3 seconds. During these 3 seconds (Countdown) 2 bars converge (see “Figure 13”).
→
To switch back from level 2 (Parameterization and Configuration) to level 1 (Operate process), press the
selection key on the left (EXIT).
MENU MANU
Press selection key
on left for approx. 3
seconds 2 bars which converge
Countdown
EXIT ENTER 1
M A I N
ACTUATOR
INPUT
X. TUNE
ADD. FUNCTION
Switch to level 2: Parameterization Switch back to level 1: Operate process
Press selection key
on left
Figure 13: Switch operating level
english
Type 8692, 8693