Burkert Type 8693 - Manual (Page 66)

66
Installation
3. Attach electronics module and close body:
note!
Be.careful.not.to.damage.the.pins.at.the.PCB!
• When installing the electronics module, observe positioning of the pins to the PCB on the electronics
module.
→
Attach electronics module carefully and insert the pins in the PCB on the electronics module.
→
Check that the seal is correctly positioned in the body casing.
Seal
body casing
Figure 31: Position of the seal in the body casing
note!
Damage.or.malfunction.due.to.ingress.of.dirt.and.moisture!
To ensure protection class IP65 / IP 67:
• Screw in body casing to the stop.
→
Screw in body casing (with transparent cap) (screwing tool: 674077 13) ).
→
Switch on supply voltage at the unit and the proximity switch connector.
→
Restart operation of positioner.
13)
The screwing tool (674077) is available through your Bürkert sales office.
english
Type 8692, 8693