FEC FUSIONE-HS-2 - Manual (Page 10)

Never operate the equipment with wet hands
Failure to observe this instruction may cause electric shock.
Properly GROUND all Field Ground (
pin on the POWER CORD.
power cord grounded!
Failure to observe this instruction may cause
Use the equipment under the following conditions.
¢ Ambient temperature: 0°C
¢ Ambient humidity: 90% RH or lower
¢ Atmosphere: Indoors (Avoid direct sunlight)
¢ No corrosive gases or flammable gases
¢ No oil mist, dust, water, salt, iron powder
¢ Avoid direct vibration or shocks
Failure to observe this instruction may cause
Confirm and adjust all parameters before operation
movement of the equipment.
Failure to observe this instructi
The equipment may experience sudden torque reaction when operated by hand while
engaged to a part. Grasp tool firmly with firm footing when operating. Additionally, be sure
the work piece is securely clamped from any movement during torqueing operations.
Failure to observe this instruction
Do not turn ON and OFF the equipment repeatedly.
Failure to observe this instruction
Do not use the equipment at torque higher than
Failure to observe this instruction may shorten
due to the high temperature caused by overload.
In case any abnormality occurs,
and restarting the equipment.
Failure to observe this instruction may cause injury.
Operation / Adjustment
Safety Precautions
equipment with wet hands or while standing in a wet location
this instruction may cause electric shock.
Properly GROUND all Field Ground (FG) Connections and terminals including the ground
on the POWER CORD. NEVER operate this equipment without the ground pin on the
this instruction may cause electric shock.
Use the equipment under the following conditions.
Ambient temperature: 0°C
£
+45°C (Avoid freezing)
Ambient humidity: 90% RH or lower (Avoid moisture)
Indoors (Avoid direct sunlight)
corrosive gases or flammable gases
No oil mist, dust, water, salt, iron powder
Avoid direct vibration or shocks
this instruction may cause a ground fault and malfunction.
ll parameters before operation in order to prevent unexpected
movement of the equipment.
this instruction may cause injury, false operation and malfunction.
experience sudden torque reaction when operated by hand while
engaged to a part. Grasp tool firmly with firm footing when operating. Additionally, be sure
work piece is securely clamped from any movement during torqueing operations.
instruction may cause injury.
Do not turn ON and OFF the equipment repeatedly.
instruction may cause malfunction.
equipment at torque higher than the maximum torque.
Failure to observe this instruction may shorten equipment life or cause malfunction
due to the high temperature caused by overload.
In case any abnormality occurs, remove the cause and ensure safety before resetting
and restarting the equipment.
Failure to observe this instruction may cause injury.
Caution
/ Adjustment
Safety Precautions
or while standing in a wet location.
including the ground
operate this equipment without the ground pin on the
in order to prevent unexpected
and malfunction.
experience sudden torque reaction when operated by hand while
engaged to a part. Grasp tool firmly with firm footing when operating. Additionally, be sure
work piece is securely clamped from any movement during torqueing operations.
or cause malfunction
remove the cause and ensure safety before resetting
Caution