FEC FUSIONE-HS-2 - Manual (Page 37)

FEC FUSION Operations Manual Chapter 3: System Description (Rev 2)
Page 3-7
3.2 FUSION Tool
3.2.1 FUSION Tool Part Number Breakdown
HFT-[051][M80]-[A][1][ ]-[01][A]
A B C D E F G
(A) MAXIMUM TORQUE 010 = 1.0Kgfm (9.8Nm / 7.2ft lb)
015 = 1.5Kgfm (14.7Nm / 10.8ft lb)
025 = 2.0Kgfm (24.5Nm / 18.0ft lb)
040 = 4.0Kgfm (39.2Nm / 28.9ft lb)
060 = 6.0Kgfm (58.8Nm / 43.3ft lb)
080 = 8.0Kgfm (78.4Nm / 57.8ft lb)
130 = 13.0Kgfm (127.5Nm / 94.0ft lb)
(B) MOTOR M50 = Only used on 015 Angle & Pistol Tools
M80 = Used on all other tools
(C) TOOL TYPE A = Angle
S = Straight
P = Pistol
T = “T” Type Pistol
(D) MODEL REVISION BLANK = Original Release
1 = 1 st Generation
(E) SPECIAL BLANK = Normal Function
(F) MINOR REVISION Two Digit Minor Rev. Level (Factory Use Only)
(G) HANDLE OPTION A = Includes handle with trigger start & reverse
pushbutton switch
B = Includes handle with NO trigger start or
reverse switch (switch holes plugged)
C = Includes handle with twist reverse, trigger
start
D = Hole for pin & O-ring
E = 3/8” drive on 60Nm tool (1/2” is STD)
F = 1/2” drive on 40Nm tool (3/8” is STD)