FEC FUSIONE-HS-2 User Manual
Page 16
Chapter 1: Outline
Page 1-2
1.1 About This operations manual
This manual details the configuration, components, specifications, and the operation of the FUSION Fastening
System.
The following table outlines the contents of each chapter:
Chapter
Item
Contents
Chapter 1
Outline
Basic characteristics and requirements of the
FUSION System.
Chapter 2
Specifications
General specifications of the FUSION System.
Chapter 3
System Description
Description of standard and optional system
components.
Chapter 4
System Setup and Wiring
Equipment installation procedure, dimensions,
Input and Output signal descriptions and
requirements for PLC programming.
Chapter 5
Power Up and Initial Checks
Preliminary power on and operational tests.
Chapter 6
Fastening Instructions
Basic fastening operations and presetting
procedures.
Chapter 7
System Operations
Instructions for the input of preset data and
monitoring explanations.
Chapter 8
Maintenance and Inspection
Guide for preventive maintenance.
Chapter 9
Troubleshooting
Descriptions of fastening rejects, abnormal
operation faults, and corrective actions.