FEC FUSIONE-HS-2 - Manual (Page 9)

Install or provide torque reaction for
operation. Failure to observe
Make sure controller is firmly mounted and will not come lose or fall during operation
Failure to observe
The power source shall be provided with safety measures
circuit protectors.
Do not use tools or
Failure to observe
Do not subject the
Failure to observe
Route all wiring(s)
Failure to observe
Operate the equipment within the specified power supply voltage
Failure to observe
When operating the equipment in the following conditions,
to shield the equipment.
¢ Location where
¢ Location where the equipment is subjected to
¢ Location near a
Failure to observe
Installation / Wiring
or provide torque reaction for all tools where they can bear the maximum torque
Failure to observe this instruction may cause injury and malfunction.
Make sure controller is firmly mounted and will not come lose or fall during operation
Failure to observe this instruction may cause malfunction.
The power source shall be provided with safety measures such as breakers
Failure to observe this instruction may cause fire and malfunction.
use tools or controller units that are damaged or missing parts.
Failure to observe this instruction may cause fire, injury, and malfunction.
Do not subject the equipment to excess shock and impact.
Failure to observe this instruction may cause malfunction.
) properly and firmly.
ailure to observe this instruction may cause injury, false operation, and malfunction.
Operate the equipment within the specified power supply voltage.
Failure to observe this instruction may cause injury, electric shock, fire, and malfunction.
When operating the equipment in the following conditions, take sufficient
the equipment.
where electrical noise is generated
where the equipment is subjected to a strong electric field
near a high power wire.
Failure to observe this instruction may cause injury, false operation, and malfunction.
Caution
Installation / Wiring
Safety Precautions
where they can bear the maximum torque during
injury and malfunction.
Make sure controller is firmly mounted and will not come lose or fall during operation.
such as breakers and
fire and malfunction.
or missing parts.
fire, injury, and malfunction.
, and malfunction.
injury, electric shock, fire, and malfunction.
sufficient measures
strong electric field or magnetic field
injury, false operation, and malfunction.
Caution