FEC FUSIONE-HS-2 - Manual (Page 152)

Chapter 7: System Operations
7.3.4 Data # selection
The value for digit 1 and 2 of the
(blinking) cursor is in the respected position. The
[ ↓↓↓↓ ] and [ ↑↑↑↑ ] keys. Data corresponding to the data number
in the [DATA] display (Refer to section 7.2.5). If the cursor is in the 1st digit position, by
pressing the [ ↓↓↓↓ ] or [ ↑↑↑↑ ] keys, the DATA number will be scrolled by tens.
2nd digit position, the DATA number scrolling will be one by one. As noted in the Parameter
Data List chart, the preset values are not arranged in a perfect sequence and some numbers
may be skipped. When scrolling the DATA numbers,
the same or the following parameter number.
Page 7-28
The value for digit 1 and 2 of the [COUNT/D-NO] display may only be changed when the
(blinking) cursor is in the respected position. The [COUNT/D-NO] value is changed with the
] keys. Data corresponding to the data number [COUNT/D-NO] display will appear
in the [DATA] display (Refer to section 7.2.5). If the cursor is in the 1st digit position, by
] keys, the DATA number will be scrolled by tens. If the cursor is in the
2nd digit position, the DATA number scrolling will be one by one. As noted in the Parameter
Data List chart, the preset values are not arranged in a perfect sequence and some numbers
may be skipped. When scrolling the DATA numbers, it will scroll to the next existing value in
the same or the following parameter number.
FIG. 7-3-4 Data No. changing
display may only be changed when the
value is changed with the
display will appear
in the [DATA] display (Refer to section 7.2.5). If the cursor is in the 1st digit position, by
If the cursor is in the
2nd digit position, the DATA number scrolling will be one by one. As noted in the Parameter
Data List chart, the preset values are not arranged in a perfect sequence and some numbers
it will scroll to the next existing value in