FEC FUSIONE-HS-2 - Manual (Page 4)

Thank you for purchasing our Electric Servo Nutrunner – FUSION System .
This instruction manual describes the procedures for installation, wiring, and handling,
and actions to be taken in case of any failure.
This instruction manual shall be delivered to the end user who operates the equipment.
Read all instructions before use, and always keep this instruction manual with the equip-
ment.
Items not described in this instruction manual shall be considered “unavailable”.
The product specification and appearance described in this instruction manual is subject
to change without notice.
All rights reserved. Any disclosure, copying, distribution, or use of the information con-
tained herein for other than its intended purpose, is strictly prohibited.
For the safety of operator and equipment
Please confirm the followings when unpacking this equipment.
¡ Ensure that you received the correct model, as ordered.
¡ Ensure that there are no missing parts.
¡ Check for any damage caused during transportation.
Points to check when unpacking
¡ It is important for you to read all “Safety Precautions” before using the equipment, and under-
stand and observe all instructions and recommendations included in this manual.
¡ Read all instructions and recommendations included in this manual, understand the functions
and performance of this nutrunner, and correctly use this equipment.
¡ Wirings and parameter settings shall only be conducted by a qualified professional.
¡ Never conduct a withstand voltage test or insulation resistance test on this equipment.
¡ Indicate the following on all instruction manuals that use this equipment.
”This equipment is capable of high voltages hazardous to human life.”
Introduction