HID DTC400E/C30E/M30E User Guide - Manual (Page 101)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 4-54
4 Verify if the Vertical Image Position Setting is set correctly or incorrectly. See
the graphic below.
a. Adjust the value as described below:
• If the white border is on the top edge of the card, adjust the Vertical
value by +2.
• If the white border is on the bottom edge of the card, adjust the Vertical
value by -2.
b. Click on OK.
c. Run a self-test.
d. If the white border is diminished, continue the adjustment until it is gone.