Using the flipper prox offset option, Using the flipper prox offset option -113 – HID DTC400E/C30E/M30E User Guide User Manual
Page 237
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1)
6-113
Using the Flipper Prox Offset Option
Step Procedure
1
Normally the Prox encoder is installed into Bay1 and no adjustment is
necessary.
• This setting is factory set at 0.
• This setting option relates to the Prox encoder installed into Bay 2.
Advertising