HID DTC400E/C30E/M30E User Guide - Manual (Page 235)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 6-111
Using the Print Temperature Offset
Step Procedure
1 Adjust the printing temperature for the rewriteable cards as needed.
• Increase
the Current Setting to cause more heat to be used in the
printing process.
OR
• Decrease
the Current Setting to cause less heat to be used in the
printing process.
(Note: Print Temp Offset provides user ability to control Printhead heat level
when the Print (Write) Operation is performed on rewriteable cards. Higher
heat level needs to be applied for darker printing on rewriteable cards. A
lower setting will produce a lighter image on rewriteable cards accordingly)