HID DTC400E/C30E/M30E User Guide - Manual (Page 163)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 6-39
Using the Encoding Mode dropdown list
You can use the Encoding Mode option in order to specify which magnetic encoding
standard to use.
Category Description
Installation The DTC400e/C30e/M30e Card Printer can be installed with
one of two types of factory installed Magnetic Stripe Encoding
Modules.
Magnetic Encoding
options (changing
and modifying) Change the encoding mode and coercivity setting or modify the
ISO standards for Tracks 1, 2 and 3. This can be done by
correctly modifying these Magnetic Encoding options.