Printer components: resin-only print ribbons, Printer components: resin-only print ribbons -8 – HID DTC400E/C30E/M30E User Guide User Manual

Page 22

Advertising
background image

RESTRICTED USE ONLY

Fargo Electronics, Inc.

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1)

2-8

Printer Components: Resin-Only Print Ribbons

Resin-only print Ribbons consist of a continuous roll of a single resin color. No protective
overlay panel (O) is provided since resin images do not require the protection of such an
overlay. The following resin-only Ribbon types are available for use with the
DTDC400e/Persona C30e/M30e.

Type Description

Standard Resin Black
(K) (provides 1,000
prints)

This Ribbon provides high resin durability ideal for most
general-purpose monochrome ID card applications. Resin black
bar codes are readable by both infrared and visible-light bar
codes scanners.

Premium Resin Black
(K) (provides 1,000
prints)

This Ribbon provides maximum resin durability ideal for
applications such as access control where cards are repeatedly
swiped through a Magnetic Stripe reader. Resin black bar codes
are readable by both infrared and visible-light bar codes
scanners.

(Note: Using a Premium Resin Black Ribbon will provide better
photo realistic output.)

Colored Resin

(provides 1,000 prints)

Several colored resin Ribbons are available in a variety of colors
for customizing or color-coding resin-only ID cards.

Metallic Resin

(provides 500 prints)

Metallic resin Ribbons are available for printing resin images
with a unique metallic sheen.

Advertising