Resolving the incorrect image darkness problems – HID DTC400E/C30E/M30E User Guide User Manual

Page 92

Advertising
background image

RESTRICTED USE ONLY

Fargo Electronics, Inc.

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1)

4-45

Resolving the Incorrect Image Darkness problems

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.

Step Procedure

1

Review the following information.

• Symptom: Printed cards are too dark or too light.

• Printer Error State: None

• Driver Monitor Error Display: None

2

Run a self-test to ensure that the issue is not with the Driver settings.

3 Adjust

the

Dye-Sub Intensity setting within the Image Color tab of the Printer

Driver. See Using the Image Color tab (C30e/M30e) procedure.

4

Correct the Image Darkness. See the Using the Image Darkness Option
procedure.

Advertising
See also other documents in the category HID Equipment: