Resolving the incomplete resin printing problems – HID DTC400E/C30E/M30E User Guide User Manual
Page 98
Advertising
![background image](/manuals/433144/98/background.png)
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1)
4-51
Resolving the Incomplete Resin printing problems
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1
Review the following information.
• Symptom: Black resin text and barcodes appear faded or too light.
• Printer Error State: None
• Driver Monitor Error Display: None
2 Increase
the
Resin Heat setting within the Image Color tab of the Printer
Driver.
3 Increase
the
Image Darkness. See the Using the Image Darkness Option
procedure.
Advertising