Adjusting the ribbon type option, Adjusting the ribbon type option -13 – HID DTC400E/C30E/M30E User Guide User Manual
Page 137
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1)
6-13
Adjusting the Ribbon Type option
Use the Ribbon Type option to select Print Ribbons for DTC400e/C30e.
Step Description
1
Adjust to match the Ribbon Type selection with the Ribbon Type already
loaded in the Printer.
•
YMCKO: Yellow, Magenta, Cyan, Resin Black, Overlay
OR
•
YMCKO: Yellow, Magenta, Cyan, Resin Black, Overlay/Half Panel
OR
•
YMCKOK: Yellow, Magenta, Cyan, Resin Black, Overlay, Resin Black
OR
•
KO Resin: Black, Overlay
OR
•
K: Standard or Premium Resin
OR
•
Colored Resin: Colored Resin is available in Red, Blue, Green or White
OR
•
Metallic Resin: Metallic Resin is available in Gold or Silver
OR
•
YMCFKO: Yellow, Magenta, Cyan, Fluorescing, Resin Black, Overlay
(DTC400e only)
OR
•
YMCFKOK: Yellow, Magenta, Cyan, Fluorescing, Resin Black, Overlay,
Resin Black (DTC400e only)
OR
•
NONE- Re-Writable