HID DTC400E/C30E/M30E User Guide - Manual (Page 157)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 6-33
Using the Image Position Controls
Use the Image Position controls to adjust the position of the overall print area to be
precisely centered on a card.
Step Procedure
1 Click the Vertical and Horizontal adjustment arrows to adjust the Image
Position values.
• When adjusting these values, keep in mind that the card always remain in
the same position while moving through the Printer, regardless of image
orientation.
• To illustrate this, the card illustration shown in the Image Position box will
flip and rotate according to the Portrait, Landscape or Rotate 180
Degrees selection.
• The outline around the illustration will always remain in the same
Landscape orientation.