HID DTC400E/C30E/M30E User Guide - Manual (Page 177)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 6-53
Using the Character Parity dropdown list
Use this option to customize the Character Parity (used to encode the magnetic data on the
currently selected track).
Step Procedure
1 Select No Parity to change the Character Parity to none.
OR
Select Even Parity to change the Character Parity to Even Parity.
OR
Select Odd Parity to change the Character Parity to Odd Parity. (Note:
This is the default for all tracks.)