HID DTC400E/C30E/M30E User Guide - Manual (Page 243)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 7-5
Changing the Secure ID Properties
Step Procedure
6 On the Template right click on the Secure ID box for the options shown below.
Step 4. Right mouse click on the
Secure ID box for these options:
1. Use the Font options.
2. Move to Fluorescing Panel.
3. Move to Resin Panel.
4. Rotate clockwise.
5. Rotate counter-clockwise.
6. Delete the Secure ID box.
Step 2. Click . Secure ID
Step 3. On the Template box, click
and drag a box on the Security ID
template.
Step 1. Check the
checkbox.
Enable
Secure Imaging