Enabling the frontside and backside options, Enabling the frontside and backside options -80 – HID DTC400E/C30E/M30E User Guide User Manual
Page 204
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1)
6-80
Enabling the Frontside and Backside options
Step Procedure
1 Select
Print Both Sides under the Device Options tab to enable the Backside
option under the K Panel Resin tab. (Note: This same selection applies to the
K Panel Resin backside option.)
Advertising