HID DTC400E/C30E/M30E User Guide - Manual (Page 140)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 6-16
Selecting the Auto Ribbon Select option
Step Description
1 Click Auto Ribbon Select to verify that the Ribbon type selected matches the
Ribbon installed in the Printer. (Note: The Printer Driver will change the Ribbon
type to the correct setting or validate. It will also display a dialog that it has
changed the current setting or that the current Ribbon type is correct.)
2 Click Test Print to send a simple self-test print to the DTC400e/C30ePrinter.
•
Ensure that an YMCKO Ribbon is installed.
•
Ensure that the computer is effectively communicating with the Printer and
that the Printer is functioning properly.
Ensure that an YMCKOK Ribbon is installed in order for a DTC400e/C30e
Card Printer with a Flipper Table Module to print a dual-sided image.