HID DTC400E/C30E/M30E User Guide - Manual (Page 176)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 6-52
Using the LRC Generation dropdown list
Use this option to customize the LRC Generation Mode (used to encode the magnetic data
on the currently selected track).
Step Procedure
1 Select No LRC to change the LRC Generation to none.
OR
Select Even Parity to change the LRC Generation to Even Parity. (Note:
This is the default for all tracks.)
OR
Select Odd Parity to change the LRC Generation to Odd Parity.