HID DTC400E/C30E/M30E User Guide - Manual (Page 17)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 2-3
Type Description
ISO Magnetic
Encoding
• ISO: This option allows the user to select magnetic encoding that
conforms to ISO standard 7811, Parts 1-7.
• ISO Coercivity: ISO magnetic encoding option provides selectable
options for either High or Low Coercivity.
See the Using the Magnetic Encoding tab section.
Memory 2MB RAM
Monochrome
Printing The C30e shall render rewriteable card images using a monochrome
color pallet.
The M30e shall render card images using a monochrome pallet.
Operating
Temperature 65° to 80° F / 18° to 27° C
Print Area CR-80 edge-to-edge
Printer
Drivers 32-bit Windows 2000/XP/2003/VISTA ( 32 bit & 64 bit)
Print Method
• Dye-Sublimation/Resin Thermal Transfer
• Resin Thermal Transfer
Print Speed Print Speeds**
• 7 seconds per card / 514 cards per hour (K, Color Resin)*
• 12 seconds per card / 300 cards per hour (KO, BO)
• 27 seconds per card / 133 cards per hour (YMCKO)*
• 35 seconds per card / 102 cards per hour (YMCKOK)*
*Indicates the Ribbon type and the number of Ribbon panels printed
where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, O=Overlay,
**Print speed indicates an approximate batch print speed and is
measured from the time a card feeds into the printer to the time it ejects
from the printer.
Print speeds do not include encoding time or the time needed for the PC
to process the image. Process time is dependent on the size of the file,
the CPU, amount of RAM and the amount of available resources at the
time of the print.