HID DTC400E/C30E/M30E User Guide - Manual (Page 127)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 6-3
Using the Card tab (DTC400e/C30e/M30e)
Adjusting the Card Size Option
Step Description
1 Click inches or mm to choose the desired unit of measurement.
(Note No.1: When designing a card format, always set the card size or page
size within the card design program to the exact dimensions of a CR-79 or
CR-80 card.)
(Note No.2: The Card Size indicates that the Printer accepts standard,
credit card size CR-80 (ISO ID-1) cards or CR-79 sized cards. The
dimensions of the total print area for this card size appear in the Print Width:
and Print Length: areas, as shown below.)