HID DTC400E/C30E/M30E User Guide - Manual (Page 190)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 6-66
Using the Defined Area Option
Step Procedure
1 a. Determine whether to use the Front option (via the Front radio button) or
the Back option (via the Back radio button).
b. Select the Defined Area(s) option to activate the card grid in the upper half
of the window. It is through this card grid that up to five (5) Defined Areas
can be assigned.
2 When the card grid is first activated, a small black square will appear at its
default size of .2" x .2" / 5mm x 5mm and at its default location in the lower left-
hand corner (0, 0). This square represents the first defined area.