HID DTC400E/C30E/M30E User Guide - Manual (Page 164)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 6-40
ISO Encoding
selection (active
and inactive
functions) If you select ISO Encoding, you send down a formatted set of
characters. (Note: This selection activates the track tabs. However,
all functions on the Track tabs are inactive or gray and display ISO
defaults, which are the defaults listed for each track below. The Shift
Data Left check box remains unchecked and inactive.)